Expert knowledge

Movement joints compensate for the movement of tiles, which extends down through the tiles, the bed and screed layer below. Without them, stress builds up between the tile and the substrate, causing de-bonding, bulging and cracking. Therefore these stress-relieving joints are an essential part of any tiling installation, and should be incorporated at the design stage.

These types of screed are more commonly referred to as Anhydrite; they are a gypsum based screed, in which the binding agent either consists of natural anhydrite, thermal anhydrite, alpha hemi-hydrate or mixes of these.

With the introduction into the UK, of large format, thin-bodied porcelain tiles (thicknesses ranging from 3mm to 5mm), it is clear that the main benefit for this type of tile is reduced weight restrictions; For example fixing onto skimmed or plastered backgrounds or alternatively for refurbishment works – tile on tile.

The Guide gives an introduction to the best products to clean and maintain beautiful porcelain and ceramic tiles. From Deterdek Pro, suitable for the removal of cement deposits during builders clean prior to hand-over, to PS87 Pro, used for cleaning heavy traffic workshop areas; and for all other areas the gentle cleaning action of the pH neutral Cleaner Pro.

Terracotta is a beautiful natural material. Terracotta isn’t a difficult material to look after. But it does have a high level of absorbency, so it needs to be correctly sealed to prevent staining. Like all natural surfaces, a correct cleaning regime process will ensure that the surface maintains its original look and is easy to care for. 

A crackle glaze tile is a type of ceramic tile that features a distinctive aesthetic created through a specific glazing and firing process. Due to the inherent nature of crackled glaze finishes, they require an additional step in the installation and cleaning process. Read our helpful guide here. 

Terrazzo and natural stone floors are beautiful options for your project. This guide covers pre-installation, anti-contaminant treatment, end-of-work cleaning, protection, regular cleaning, and heavy duty cleaning. 

Most backgrounds used in the UK are water-sensitive i.e. Plaster, plaster-board, timber etc. To ensure the longevity of a tiled project these backgrounds require some type of protective layer over the surface to protect them from the ingress of moisture. This can be done in various ways depending upon what type of service environment they will be put into once commissioned.

Our bespoke fabrication services enable clients to think beyond standard porcelain tile installations. We create customised tiles designs and unique products to suit clients’ exacting specifications and projects. Our fabrication processes enable us to create a wide variety of stair treads, edges, nosings, risers and slip resistant finishes for every type of application.